Adjustable conveyor guide rail brackets utilize the Conveyor T-slot profile for mounting and are available in three styles with each style offering multiple adjustment ranges. The 1/8″ and 1/4″ conveyor guide rail brackets are constructed using two aluminum L brackets. The Quick Adjust bracket is constructed of aluminum brackets and stainless steel adjustment rods and include quick-adjust t-handles. Our adjustable conveyor guide rail systems are constructed of UHMW with a stainless steel mounting support and are available in five widths. These conveyor side guide brackets are sold individually and adjustable rails are sold by the foot.
| Part No. | Bracket Style | LH | HH | IF | OF |
|---|---|---|---|---|---|
| 40-7205 | 1/8″ Aluminum | 0.75″ | 4.25″ | 3.50″ | 3.00″ |
| 40-7206 | 1/8″ Aluminum | 0.75″ | 5.25″ | 4.50″ | 3.75″ |
| 40-7212 | 1/4″ Aluminum | 0.50″ | 0.75″ | 1.00″ | 0.75″ |
| 40-7213 | 1/4″ Aluminum | 0.75″ | 3.25″ | 2.00″ | 0.37″ |
| 40-7214 | 1/4″ Aluminum | 0.75″ | 5.25″ | 2.00″ | 0.37″ |
| 40-7251 | Quick Adjust | 0.50″ | 2.75″ | 2.25″ | 0.75″ |
| 40-7252 | Quick Adjust | 0.50″ | 4.75″ | 4.25″ | 0.75″ |
| 40-7253 | Quick Adjust | 0.50″ | 6.75″ | 6.25″ | 0.75″ |
| 40-7254 | Quick Adjust | 0.50″ | 8.75″ | 8.25″ | 0.75″ |
Note: Adjustment values shown are measured from the centerline of the mounted rail to the conveyor belt surface for height and from the mounted rail face to the inside edge of the conveyor side frame for width. Abbreviations: LH = low height, HH = high height, IF = inside the frame, OF = outside the frame.